- Test Bench
Diesel Injection Pump Test Bench Common Rail Injector Test Bench Common Rail Injector and Pump Test Bench EUI EUP,HEUI,CAT320D TEST BENCH Common Rail Simulator Nozzle Tester EDC Pump Tester/Sensor Tester CRI Stroke Measuring System PT Cummins Test Bench Balance Machine Work Bench Fuel System Tester DIAGNOSTIC SCANNER Stage3 Common Rail Injector Measuring Tools DPF,DOC,SCR Cleaning Machine
- Common Rail and EUI EUP HEUI HEUP Tools
- Diesel Engine Parts
Spare Parts Nozzle Plunger Head Rotor Delievery Valve Common Rail Shims Diesel Injector Tight Hat List 12V, 24V Solenoid Valve Bosch Pump Diesel Regulating Valve DRV Bosch Fuel Metering Valve DRV Bosch Fuel Rail Pressure Sensor Bosch Injector Valve Assembly Bosch Injector Valve Cap Pressure Limiting Valve Denso Valve Denso Valve Rod Denso SCV Valve Delphi Valve Delphi Rail Pressure Sensor Delphi Inlet Metering Valve CAT Plunger CAT Plunger Pump CAT Delievery Valve
- Bosch
- Denso
- Delphi
- CAT
- Cummins
- Siemens VDO
- Ultrasonic Tank Cleaner
- Wheel Loader
- Air Compressor
- AC Refrigerant Recovery Machin
PRODUCTS products
-
Free hotline
0086-13455388360
DT-W07 Selected Work Bench Model A
Content
DT-W07 Selected Work Bench Model A
Standard sizes:1200L*570W*2000H(mm)
Table size:
1200L*570W*800H (mm)
1- Panel:2.0mm stainless steel panel,Edge 15mm high,14pcs M8
bolts welded through the 25mm thickness wooden backboard
2-Test bad stand:Right side cabinet with lock, two partitions
for the maintenance of accessories, tools and so on
3- Light:3pcs full view LED-12W top light
4- Socket:2pcs,,International common standard
5- Switch:2pcs,,Respectively control both sides and the middle
LED dome light on and off
6- Compressed air is introduced into the setting : ∅
8
introduction of a gas source plug 1, the output gas source
shortcut plug 1, it is recommended: use away from the test bad
7- Air gun:1pc
8- Out of the duct settings:Optional air filter device, you
can form the work area of the desktop area of the positive
pressure, to achieve local dust-free operation, to meet the
precise maintenance needs
9- Siding frame of the standard configuration:Storage slot
board 2pcs
10- Stand support: 4pcs M16 bolts for keeping the table flat .
Add: High-Tech Zone, Taian, Shandong, China.
TEL:+86-13455388360 FAX: +86-538-2096189 E-mail: [email protected]
TAIAN DONGTAI MACHINE MANUFACTURING CO.,LTD 備案號:魯ICP備15006010號-1